# \[Success\] Connecting Pimax Crystal to MSI Katana 15 B13V (RTX 4070) via USB-C - Step-by-Step Guide

**URL:** <https://forum.openmr.com/t/success-connecting-pimax-crystal-to-msi-katana-15-b13v-rtx-4070-via-usb-c-step-by-step-guide/42624>\
**Category:** General discussion\
**Tags:** support\
**Created:** [January 19, 2026, 6:16pm UTC](https://forum.openmr.com/t/success-connecting-pimax-crystal-to-msi-katana-15-b13v-rtx-4070-via-usb-c-step-by-step-guide/42624 "2026-01-19T18:16:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pjega08](https://forum.openmr.com/letter_avatar_proxy/v4/letter/p/3d9bf3/32.png) [@pjega08](https://forum.openmr.com/u/pjega08)\
**Post date:** [January 19, 2026, 6:16pm UTC](https://forum.openmr.com/t/success-connecting-pimax-crystal-to-msi-katana-15-b13v-rtx-4070-via-usb-c-step-by-step-guide/42624/1 "2026-01-19T18:16:44Z")

</div>

Hi everyone,

I wanted to share a breakthrough for anyone owning an **MSI Katana 15 B13V** (specifically the model with **RTX 4070** ) who is struggling to connect a high-end VR headset like the **Pimax Crystal**.

There is a lot of conflicting information online stating that the Katana’s USB-C port is “only” USB 3.2 Gen 1 (5Gbps) and won’t support the bandwidth for Pimax. **I have successfully bypassed this limitation** , and here is exactly how I did it.

**1. The Hardware Discovery (The “Key”)**

Despite the MSI Katana 15 B13V not showing a “Discrete Graphics Mode” (MUX Switch) option in the MSI Center, the hardware routing is VR-ready.

- **Verification:** If you go to **NVIDIA Control Panel \> Configure Surround, PhysX** , you will see that the **USB-C (DisplayPort) icon is wired DIRECTLY to the NVIDIA GeForce RTX 4070**, not the Intel integrated graphics. This is crucial for VR.

**2. The Adapter Used**

Many guides suggest you need an expensive 8K/HBR3 adapter. I managed to make it work with a standard but high-quality brand:

- **Brand:** Hama

- **Specs:** USB-C to DisplayPort Adapter, supporting **4K @ 60Hz**.

- **Note:** Even though it’s rated for 4K@60Hz, it successfully carried the signal from the RTX 4070 to the Pimax Crystal.

**3. Connection Steps (Crucial for Stability)**

The Pimax Crystal is power-hungry, and the Katana’s USB ports might struggle. Follow this sequence:

1. **Video:** Plug the **Hama USB-C to DP adapter** into the USB-C port on the laptop. Connect the Pimax DP cable to it.

2. **Power & Data:** Do NOT plug the Pimax USB cables directly into the laptop if you have the **Pimax Power Hub**. Plug the headset into the Hub, and the Hub into a USB 3.0 (blue/red) port on the Katana.

3. **Software:** Open **Pimax Play**. If the headset isn’t recognized immediately, restart the service in the settings.

**4. Performance Settings**

Since the mobile RTX 4070 is powerful but the Pimax Crystal resolution is massive:

- **Refresh Rate:** I recommend starting at **72Hz** or **90Hz** in Pimax Play to ensure stability over the USB-C Alt-Mode connection.

- **NVIDIA Settings:** Set “Power Management Mode” to “Prefer Maximum Performance” in the NVIDIA Control Panel.

**Summary**

If you have an MSI Katana 15 B13V:

- **USB-C Port:** It DOES support DP Alt-Mode directly from the dGPU (RTX 4070).

- **Adapter:** Hama 4K@60Hz (or better) works.

- **MUX Switch:** Not needed in MSI Center as the port is already hard-wired to the NVIDIA card.

I spent a long time looking for this info and found nothing, so I hope this helps fellow Katana owners dive into high-end VR!

---

<div class="post-metadata">

**Author:** ![system](https://forum.openmr.com/uploads/default/original/2X/1/19863a63bd0f452a38669829a92f279c59ddd490.png) [@system](https://forum.openmr.com/u/system)\
**Post date:** [March 20, 2026, 6:17pm UTC](https://forum.openmr.com/t/success-connecting-pimax-crystal-to-msi-katana-15-b13v-rtx-4070-via-usb-c-step-by-step-guide/42624/2 "2026-03-20T18:17:42Z")

</div>

Closed on March 20, 2026, 6:17pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
