# Pimax Artisan only red light

**URL:** <https://forum.openmr.com/t/pimax-artisan-only-red-light/37388>\
**Category:** P2: Artisan\
**Created:** [October 30, 2021, 2:49pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388 "2021-10-30T14:49:12Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [October 30, 2021, 2:49pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/1 "2021-10-30T14:49:12Z")

</div>

Hi there  
My Artisan doesn’t start. PiTool says DP and USB (2.0) is not connected, but it is. All three cables are plugged in.  
What can I do? The headset is complete NEW, ordered and shipped from thze Pimax store. Di I have a guarantee?

Regards from Germany  
Günter

---

<div class="post-metadata">

**Author:** ![dstar](https://forum.openmr.com/user_avatar/forum.openmr.com/dstar/32/23885_2.png) [@dstar](https://forum.openmr.com/u/dstar)\
**Post date:** [October 30, 2021, 4:31pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/2 "2021-10-30T16:31:49Z")

</div>

try other DP / USB Ports.  
Especially DP will often work with only one of the 3 or 4 ports on your graphiccard.

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [October 30, 2021, 5:44pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/3 "2021-10-30T17:44:45Z")

</div>

That means, I cannot use my graphics card with DVI display AND HMD?

---

<div class="post-metadata">

**Author:** ![dstar](https://forum.openmr.com/user_avatar/forum.openmr.com/dstar/32/23885_2.png) [@dstar](https://forum.openmr.com/u/dstar)\
**Post date:** [October 30, 2021, 6:22pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/4 "2021-10-30T18:22:19Z")

</div>

no, just try another DP port.  
Or does your graphics card only have one?

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [October 30, 2021, 6:46pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/5 "2021-10-30T18:46:56Z")

</div>

I have a GTX 1050Ti. There are three Ports: DVI, HDMI and DP.  
On DVI is my Display and I want to connect the Artisan on the DP. Is this a bad idea?  
On my new Mainboard I have a DP 2.0 connector and a HDMI port too. How can I use this ports (for gaming)?

---

<div class="post-metadata">

**Author:** ![dstar](https://forum.openmr.com/user_avatar/forum.openmr.com/dstar/32/23885_2.png) [@dstar](https://forum.openmr.com/u/dstar)\
**Post date:** [October 30, 2021, 6:52pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/6 "2021-10-30T18:52:55Z")

</div>

ohh, 1050ti, the lowest end for VR.  
Sorry, no experience with this card. ☹  
You should ask the support for this. @PimaxQuorra @anon57422158 any idea?

The connections on the mainboard itself do not work. CPU graphics are far too weak

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [October 30, 2021, 7:15pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/8 "2021-10-30T19:15:38Z")

</div>

I use Windows 11, have the newest NVidia driver (496.49), DX 12, 16GB RAM  
I will try a clean windows installation on my second SSD drive.

---

<div class="post-metadata">

**Author:** ![dstar](https://forum.openmr.com/user_avatar/forum.openmr.com/dstar/32/23885_2.png) [@dstar](https://forum.openmr.com/u/dstar)\
**Post date:** [October 30, 2021, 7:34pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/9 "2021-10-30T19:34:27Z")

</div>

But I’m afraid that even if it works at some point, you won’t have much fun with the 1050ti. Try to get at least one used 1070 or better. Otherwise it is only sufficient for the simplest applications. / or small resolution

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [October 30, 2021, 7:56pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/10 "2021-10-30T19:56:36Z")

</div>

I had bought a used 1070, but I was in bad luck, because it’s broken and nobody want repair it.

---

<div class="post-metadata">

**Author:** ![Heliosurge](https://forum.openmr.com/user_avatar/forum.openmr.com/heliosurge/32/28073_2.png) [@Heliosurge](https://forum.openmr.com/u/Heliosurge)\
**Post date:** [October 30, 2021, 10:12pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/11 "2021-10-30T22:12:22Z")

</div>

Hi can you post your complete specs?

Motherboard:  
CPU:  
Ram: 16 gigs  
Gpu: 1050ti

With your 1050ti goto Nvidia Website and download bios firmware update tool.

If you have onboard Video you will need to disable it in the Bios and potentially windows device manager.

Also Ensure your 1050ti is installed in the first pciX 16 slot by your cpu.

Gpu wise you should consider an upgrade of min 1060 6g model.

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [November 1, 2021, 10:00am UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/12 "2021-11-01T10:00:06Z")

</div>

CPU is AMD Ryzen 7 3800X, 8 cores@3900MHz

Yesterday I had downloaded the Update tool and installed a firmware update for the DP 1.4.  
Since the DP update the error changes from 10936 to 10500.

 ![Pimax_error](https://community.openmr.com/uploads/default/original/3X/b/7/b7cd08841f8e06e610503be2fe9604bb842147cc.png)  
Pimax shows only a red LED on the top and a green stripe on the front.  
I don’t have base stations or controllers, only the Artisan (and NOLO, but not connected).  
I can’t buy an other graphics card, because they are too expensive and are used for bitcoin mining.  
 ![Pimax_error2](https://community.openmr.com/uploads/default/original/3X/3/9/3943b1631b9d7a525eb1f386ec56a6f7a483ec63.png)  
What is the locator?  
I cant go to Settings/HMD, because it says, the device is disconnected

---

<div class="post-metadata">

**Author:** ![Heliosurge](https://forum.openmr.com/user_avatar/forum.openmr.com/heliosurge/32/28073_2.png) [@Heliosurge](https://forum.openmr.com/u/Heliosurge)\
**Post date:** [November 1, 2021, 11:17am UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/13 "2021-11-01T11:17:46Z")

</div>

That looks to be under motion compensation. So ignore the locator.

Since you have completed the nvidia firmware update. Try swapping usb ports. If your 1050ti has more than one dp then also try swapping dp around.

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [November 1, 2021, 12:37pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/14 "2021-11-01T12:37:38Z")

</div>

The GTX 1050Ti has only one DP, one HDMI and one DVI port. There is nothing to swap.  
Now I have unpluged the HMD complete, but PiTool says, that it is plugged in (USB 3).  
Why can’t PiTool show me the right connections in real time?

---

<div class="post-metadata">

**Author:** ![Heliosurge](https://forum.openmr.com/user_avatar/forum.openmr.com/heliosurge/32/28073_2.png) [@Heliosurge](https://forum.openmr.com/u/Heliosurge)\
**Post date:** [November 2, 2021, 2:39am UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/15 "2021-11-02T02:39:43Z")

</div>

Hopefully it isn’t an issue of a weak DP signal than.

Power headset off via button and try other usb ports.

If you only have 1 usb cable with a power adapter connected to wall. Makes it easier

If you have the revised model that uses dual usb. Connect the thinner cable maybe in a powered hub or a cell charger wall socket. The thicker cable handles Data. Still use the power off via button while trying other ports powering up the headset via power button.

I would also suggest filing a support ticket as they can setup a time to try a remote support session.

If you have a friend with a computer it could be a good test as well.

For your convenience here are support links below.

* * *

[PimaxVR Support](https://support.pimax.com/en/support/home)

> **Main Site**
>
> - Self Help Database
> - Submit a Ticket

> **PimaxVR Forum Support**
>
> This group consists of PimaxVR Staff Specialists for assisting PimaxVR Consumers with resolving [Ticket](https://forum.openmr.com/new-message?groupname=PiSupport&title=Ticket%20Issue&body=Please%20include%20the%20following%20details.%0A%0DTicket%20Number:%0A%0DDescribe%20Issue:).
> 
> Please follow this Procedure before Requesting help.
> 
> 1. File a Support 🎟 At
> 
> - [PimaxVR](https://support.pimax.com/en/support/home)  
> You should receive a response within x Business days.
> 
> 1. If you have not received a response after x Business days or Support personnel is having difficulty understanding your request. Please Direct Message(PM) this group requesting assistance.
> 
> - Please provide the following Information:  
> Support Ticket # & Details of issue.
> 
> if your support issue is Tech related please explore:
> 
> 1. Use Docs in Left menu to explore 2 & 3.
> 2. Pi-Guides & Troubleshooting. (#guides )
> 3. Community Support - review Solved and post question if needed. (#vrcentral:helpme )

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [November 18, 2021, 5:17pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/16 "2021-11-18T17:17:02Z")

</div>

Hi there

I have tried different USB 2.0 ports for power connection. Off course a wall connector too.  
Rebooting the HMD via the PiTool button has no function. Restarting the service button in PiTool reboots the HMD with the following error messages:

1. 10536 status LED off → white → red
2. 10636
3. 10936  
Sometimes the Artisan will be shown in PiTool, but the status LED stays red.  
The email support sends me different firmware versions to try, but every time the same errors without any function.

---

<div class="post-metadata">

**Author:** ![Heliosurge](https://forum.openmr.com/user_avatar/forum.openmr.com/heliosurge/32/28073_2.png) [@Heliosurge](https://forum.openmr.com/u/Heliosurge)\
**Post date:** [November 18, 2021, 8:12pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/17 "2021-11-18T20:12:25Z")

</div>

Request a remote help session.

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [November 18, 2021, 8:19pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/18 "2021-11-18T20:19:34Z")

</div>

Now I have bought a replacement cable from Amazon. It will come at saturday.  
Hopefully this eliminate my problem. If not, the cable goes back, but I hope it will.

---

<div class="post-metadata">

**Author:** ![Guennie1568](https://forum.openmr.com/letter_avatar_proxy/v4/letter/g/eb8c5e/32.png) [@Guennie1568](https://forum.openmr.com/u/Guennie1568)\
**Post date:** [November 20, 2021, 4:44pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/19 "2021-11-20T16:44:54Z")

</div>

With the new cable the Artisan runs well!  
There is no blue status LED, only purple. And the green stripe in the front has a rythmic flashing. Is this correct?  
But the headset isn’t very old, only seven or eight month. Do I have warranty on articles bought in china?

---

<div class="post-metadata">

**Author:** ![Heliosurge](https://forum.openmr.com/user_avatar/forum.openmr.com/heliosurge/32/28073_2.png) [@Heliosurge](https://forum.openmr.com/u/Heliosurge)\
**Post date:** [November 21, 2021, 4:08pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/20 "2021-11-21T16:08:47Z")

</div>

Purple led with Chevron flashing should mean compatible with Parallel Projection setting is on.

With it appearing to be cable related and you said you just bought from Pimax? Then you should have a 1 year warranty. File a support ticket and they will likely send you a cable

It is good to have a spare.

Links below for your convenience

* * *

[PimaxVR Support](https://support.pimax.com/en/support/home)

> **Main Site**
>
> - Self Help Database
> - Submit a Ticket

> **PimaxVR Forum Support**
>
> This group consists of PimaxVR Staff Specialists for assisting PimaxVR Consumers with resolving [Ticket](https://forum.openmr.com/new-message?groupname=PiSupport&title=Ticket%20Issue&body=Please%20include%20the%20following%20details.%0A%0DTicket%20Number:%0A%0DDescribe%20Issue:).
> 
> Please follow this Procedure before Requesting help.
> 
> 1. File a Support 🎟 At
> 
> - [PimaxVR](https://support.pimax.com/en/support/home)  
> You should receive a response within x Business days.
> 
> 1. If you have not received a response after x Business days or Support personnel is having difficulty understanding your request. Please Direct Message(PM) this group requesting assistance.
> 
> - Please provide the following Information:  
> Support Ticket # & Details of issue.
> 
> if your support issue is Tech related please explore:
> 
> 1. Use Docs in Left menu to explore 2 & 3.
> 2. Pi-Guides & Troubleshooting. (#guides )
> 3. Community Support - review Solved and post question if needed. (#vrcentral:helpme )

---

<div class="post-metadata">

**Author:** ![system](https://forum.openmr.com/uploads/default/original/2X/1/19863a63bd0f452a38669829a92f279c59ddd490.png) [@system](https://forum.openmr.com/u/system)\
**Post date:** [January 20, 2022, 4:09pm UTC](https://forum.openmr.com/t/pimax-artisan-only-red-light/37388/21 "2022-01-20T16:09:36Z")

</div>

Closed on January 20, 2022, 4:09pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
