# Nasal FoV of Pimax and Quest

**URL:** <https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930>\
**Category:** General discussion\
**Tags:** oculus-quest, fov, pimax-8k\
**Created:** [December 5, 2022, 3:13am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930 "2022-12-05T03:13:30Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![LionBrooks](https://forum.openmr.com/letter_avatar_proxy/v4/letter/l/ba9def/32.png) [@LionBrooks](https://forum.openmr.com/u/LionBrooks)\
**Post date:** [December 5, 2022, 3:13am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930/1 "2022-12-05T03:13:30Z")

</div>

Hi, I barely saw discussion about nasal fov but it has bothered me for a long time.  
On the nasal side, I can feel back blurry edges in my FoV. I did a comparison between my pimax 8k and quest pro, and found it is severer in pimax (might due to canted design).

Also, when I press the headset harder on my face (smaller eye relief) or my vergence distance is larger, those black edeges are less obvious. I suppose this is caused by insufficient nasal side of fov?

Although it is not 100% unaccpetable, it is bit of annoying. Anyone has the same experience? And any thoughts about what will be a good nasal side fov?

---

<div class="post-metadata">

**Author:** ![PimaxQuorra](https://forum.openmr.com/user_avatar/forum.openmr.com/pimaxquorra/32/15692_2.png) [@PimaxQuorra](https://forum.openmr.com/u/PimaxQuorra)\
**Post date:** [December 5, 2022, 6:13am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930/2 "2022-12-05T06:13:51Z")

</div>

Hello,

Have the comfort kit installed on the headset?  
This will improve your wearing experience and make those edges less visible / completely erased.

Regards.

---

<div class="post-metadata">

**Author:** ![LionBrooks](https://forum.openmr.com/letter_avatar_proxy/v4/letter/l/ba9def/32.png) [@LionBrooks](https://forum.openmr.com/u/LionBrooks)\
**Post date:** [December 6, 2022, 1:11am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930/3 "2022-12-06T01:11:11Z")

</div>

Thanks for the advice. The comfort kit did provide better wearing experience.  
But I feel it also increases your eye relief distance and lead to even smaller FoV. So the ‘edges’ are more clear.

---

<div class="post-metadata">

**Author:** ![PimaxQuorra](https://forum.openmr.com/user_avatar/forum.openmr.com/pimaxquorra/32/15692_2.png) [@PimaxQuorra](https://forum.openmr.com/u/PimaxQuorra)\
**Post date:** [December 7, 2022, 3:18am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930/4 "2022-12-07T03:18:04Z")

</div>

Hello,

You may try to adjust the strap till a crisp image is shown on the headset.

---

<div class="post-metadata">

**Author:** ![system](https://forum.openmr.com/uploads/default/original/2X/1/19863a63bd0f452a38669829a92f279c59ddd490.png) [@system](https://forum.openmr.com/u/system)\
**Post date:** [February 5, 2023, 3:18am UTC](https://forum.openmr.com/t/nasal-fov-of-pimax-and-quest/39930/5 "2023-02-05T03:18:45Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.